How to renovate a tile?

Practical, aesthetic, solid, easy to maintain: tiling has many advantages. Whether it is made of ceramic, terracotta, earthenware, stoneware, cement, or even marble, like any floor covering, it is not spared by the vagaries of time. Also, when a tile is damaged, it is better not to wait too long to renovate it so that the damage does not become more important. Depending on the condition of your floor, various works will be necessary for its refurbishment. What are the different steps to renovate this type of coating? Why call a professional for the renovation of your tiling? What kind of profession to rely on?

What are the different stages of tiling renovation?

Your tiling has suffered a lot of damage, and you would like to be able to give it a second youth? Then, discover the stages of its renovation, depending on the degree of damage.

Cleaning and site preparation

Whatever the size of the site, a serious professional will always start by preparing the support to be renovated.

Cleaning is not a step to be taken lightly and should be done with care. The tiles are vacuumed and then rubbed so that the surface to be worked is spotless. The tile ends up covering the areas to be protected to avoid unwanted collateral damage.

Impact repair

It is often the main reason for renovating tiles. Impacts and splinters not only tarnish the appearance of the floor covering but can also be dangerous when walked barefoot, which is common in a bathroom. If the impacts are not too numerous and essential, it is unnecessary to replace the damaged tile (s). Repair may be possible. For this, the craftsman uses a tube of enamel to seal the gaps and chips and then adds a little dye in the same shade as your tiles. He finishes by smoothing the putty so that there is no irregularity on the surface.

Replacement of damaged tiles

Unfortunately, repairing the impacts is insufficient in some cases, and replacing damaged tiles is necessary.

In the case of glass tiles, the replacement of a cracked tile or one showing a shine will, for example, be essential if you want an elegant result. The tile will proceed tile by tile. First, he will scrape the joint and then, using a chisel, break the tile to be removed. He then scrapes off any traces of glue or old mortar left on the ground. He then applies a layer of thin-set mortar and places the new tile, making sure that it is well-aligned with the other tiles and at the same level. He then resumes the joint around the tile or all the joints, depending on their state of wear and soiling.

We will start by changing the tiles that require it; then, we will plug the gaps in the other tiles because this kind of intervention can damage the adjacent tiles.

The main difficulty when replacing one or more damaged tiles is to find a tile that blends in with the old one: even if the reference of your tile is followed, there may be color variations. From one bath to another, variations will be visible and more or less elegant when replaced.

Thus, when installing new tile, it is recommended to keep the surplus tiles in case a tile replacement is necessary.

If you do not have identical tiles facing you, it is sometimes better to twist the existing one, by adding a listel to a wall tile, for example, or even completely change your tile.

Renovation of seals

The joints of our tiles play a double role: they ensure the waterproofing of the floor and allow a beautiful finish of the coating.

When they are damaged, these two functions are therefore no longer provided. However, if the joints are only slightly damaged, a simple coat of specific paint manages to restore them to their whole shine.

In the event of more severe damage, it is recommended to call on a craftsman who will remove them and replace them with new ones.

Do you want to give your interior a facelift and not show traces of shock or asperity? Then, rather than completely changing your floor, know that there are moisture-resistant tile paints, which offer satisfactory results provided, of course, that their implementation has been entrusted to expert hands.

The particular case of old tiles

Are you in the presence of an old tiling that has cachet but some of which are very damaged – beautiful art deco cement tiles, century-old committees? Don’t be discouraged; maybe you can keep it partially.

Indeed, depending on how it was laid – if it was laid on a bed of lime, for example – your old tiles can perhaps be removed entirely without too much damage. In this case, your tile can review the layout and re-install the original tiles in a carpet style by surrounding them with a border of new tiles.

How much should you spend on renovating your tiling?

The budget for your tiling renovation work will depend on several factors, particularly the type of tiling (terracotta, cement, earthenware, porcelain stoneware, ceramic, terracotta, etc.) and the state in which it is located.

Suppose the renovation of your tiling involves laying a new one. In that case, you must also consider the installation technique (straight, diagonal, staggered) as well as the size of the tiles when calculating your budget. However, here are some general indications that can give you an idea of ​​the price to renovate your floor. Union Complex provides the best furnished Apartments.